Protection
based on
analysis results
Signal outputs enable automated reaction via machine control, e.g. via plant control or control technology. The IFTA RelOut16 and DA8 modules are the technical prerequisites for this protective functionality. The DA8 module can also transmit sensor signals to other systems as buffered outputs.
We also offer the communication modules PROFIBUS and PROFINET that can handle in- and output at the same time.
DA8
| Number of channels: | 8 |
| Sampling rate: | Max. 204.8 kHz (synchronous per system) |
| Bit resolution: | 16-bit |
| Galvanic isolation: | Module to ground |
| Weight: | 195 g |
| Max. output signal: | ±12 V |
| Short-circuit current: | ±75 mA |
| Max. output signal: | ±20 mA |
| Open-circuit voltage: | ±14 V |
The analog outputs support industrial standard signals such as ±10 V, 0-10 V or 4-20 mA. This allows, for example, for linear valves to be approached directly or to control frequency inverters for AC motors.
It is also possible to generate calculated results such as:
The signal from the AD4 input modules can also be made available as a buffered output.
| Number of channels: | 16 |
| Sampling rate: | 50 Hz |
| Galvanic Isolation: | Between channels and ground |
| Weight: | 190 g |
| Switching capability voltage: | 30 V at 1 A |
| Switching capability current: | 1 A at 30 V |
| Condition currentless: | open |
Do you have any questions about vibration measurement? Do you need assistance with the interpretation of measurement data? We are pleased to support you. Get in touch with us or send us a request.
