New Tem­per­a­ture Mea­sure­ment Mo­d­ule, Gal­van­i­cal­ly Iso­lat­ed, 4 Chan­nels Ther­mo Ele­ments

The new IFTA TI4 input mod­ule pro­vides pre­cise and low-noise tem­per­a­ture mea­sure­ments with a wide range of sen­sors. The mod­ule with 4 in­di­vid­u­al­ly gal­van­i­cal­ly iso­lat­ed in­puts en­ables mea­sure­ment, record­ing and mon­i­tor­ing of tem­per­a­tures on ma­chines and their anal­y­sis along with the si­mul­ta­ne­ous­ly mea­sured vi­bra­tion sig­nals.

Tech­ni­cal High­lights:

• Tem­per­at­ure meas­ure­­ment by ther­mo ele­­ments or res­ist­ance ther­­mo­met­ers
• 4 ana­log in­­puts
• Sam­p­ling rate of up to 5 Hz
• Gal­­van­ic isol­a­­tion per chan­nel
• Sup­port­ed tem­per­a­ture sen­sors:
  • Ther­mo ele­­ments (type B, E, J, K, N, S, R, T) with pre­­cise cold junc­­tion com­pen­s­a­­tion per chan­nel and dif­fer­en­tial mea­sure­ment
  • Re­sist­ance ther­­mo­met­ers (RTDs) in 2-, 3-, or 4-wire meas­ure­­ments
  • Ther­mis­­tors

Ad­­van­t­ages of the tem­per­at­ure INPUT mod­ule:

• Easy meas­ure­­ment of dif­fer­­ent tem­per­at­ure sen­sors with only one meas­ure­­ment mod­ule
• The in­­teg­rat­ed cold junc­­tion com­pen­s­a­­tion al­lows an easy and pre­­cise meas­ure­­ment with ther­mal ele­­ments
• Thanks to the 3- or 4-wire meas­ure­­ment in com­bin­a­­tion with the built-in com­pen­s­a­­tion, the TI4 en­­sures re­li­able meas­ure­­ments also when meas­ur­ing with res­ist­ance ther­­mo­met­ers over long lines
• Sup­pres­­sion of mains hum

More in­for­ma­tion and Tech­ni­cal Data

Back­ground knowl­edge tem­per­a­ture

The right sen­sor se­lec­tion