Key data:

• Three test/measurement rigs

• Operation of combustion systems with gaseous and liquid fuels

• Cooling capacity of up to 100 kW for simulation of heating circuits

• Simulation of domestic water use

• Explosion-protected laboratory by forced ventilation

• high acoustic damping through room-in-room construction

• own workshop for construction of adapters and probes required for measurements

Measuring equipment:

• various flow meters to determine the air and gas mass flows involved

• Exhaust-gas analyser for verification of operating points

• Various cooled and uncooled piezoelectric transducers and microphones for measuring sound pressure oscillation in the combustion system

• OH- and C2 probes developed in-house for measuring heat-release in the combustion zone of the system being measured

• Hot-wire anemometer for measuring flow velocities and distributions

• Accelerometers to measure mechanical vibrations

The Argus OMDS system developed internally by us is used for detection and analysis of the sensor signals, using instrument technology.